¡Producto añadido a favoritos!
Inicia sesión para continuar
Mold release
IVA incluido
Mineral release agent for candles, soaps and lanterns. It is a liquid release agent, very simple and practical to use, which must be spread on the surface of the mold that will be in contact with wax or soap. This release agent for candles and soaps creates a thin layer in the mold and prevents the figure from sticking. It is ideal to facilitate the unmolding of candles, lanterns and soaps that you make at home. Important! It is essential to spread the release agent for soaps and candles well with a brush or a cloth so that there are no stains on the final figure. This liquid release agent will also serve to make your own silicone molds, helping to unmold the dies without breaking them. It is ideal for metal, plastic or methacrylate molds. You can buy liquid release agent wholesale and retail, with quantity discounts. It does not go rancid and is colorless and odorless.
Liquid release agent
The liquid release agent that you can buy in Gran Velada is of mineral origin and is used when making candles, lanterns or soaps to facilitate unmolding. It has no smell or color and is applied with a brush or cloth on the surface of the mold.
This liquid release agent for candles, lanterns and soaps is recommended to use if you are going to work with plastic, metal or methacrylate molds. In silicone molds it is not necessary to apply it, since they are non-stick.
It is also advisable to use this liquid release agent in the manufacture of silicone molds. In this case it is applied on the figure and then the silicone is poured on top. In this way you can recover the figure in a simple way and you will get a perfect mold to make your diy elaborations.
Release agent for candles
Using this release agent for candles and soaps is very simple. Here we detail step by step how to do it:
- 1. Apply the release agent for candles and soaps on the surface of the mold that will be in contact with wax or soap.
2. Spread it very well with a brush or kitchen paper to prevent excess release agent. Otherwise there may be stains on the surface of the candle or soap you make.
3. If the mold you are going to work with has no base, it is also advisable to put a little release agent on the work surface.
Release agent for soaps
These are the main technical characteristics of the release agent for soaps and candles that you can buy in Gran Velada:
- Product description: liquid, odorless and colorless release agent to apply on molds and dies to facilitate unmolding.
Active material: paraffin ore
Flash point: >170ºC
Density: 0.81 – 0.89 g/cm3 at 20ºC
Handling: do not handle at temperatures above 60ºC.
Conservation: Keep away from heat, sparks and flames. Do not store at temperatures above 25ºC. Store protected from direct light.
Recommendations: work in a well-ventilated space.
We provide this data to the best of our knowledge. The data indicated do not exempt the buyer from carrying out his own entry control nor do they ensure the suitability of the product for a specific application.
Where to buy release agent?
In the online store of Gran Velada you can buy release agent. We put it at your disposal in different formats so that you can acquire the one that best suits your needs. Process your order online today and you will receive it in just a few days. Wholesale and retail.
Descarga aquí la documentación
